44" SSL SWING ARM BRUSH CUTTER

Description

• THE SKID STEER LOADER SWING CUTTER IS DESIGNED TO BE ABLE TO SWING OFF TO THE SIDE SIMILAR TO A BACKHOE ARM WITH A BRUSH CUTTER ON THE END FOR HARD TO REACH AREAS ALLOWING YOU TO TAKE DOWN DENSE FORESTRY UNDERGROWTH ON BANKS UP OR DOWN FROM YOU. IT IS ALSO REFERRED TO AS A BRUSH HOG, BUSHOG, BUSHHOG. REQUIREMENTS TO OPERATE THE MACHINE ARE AS FOLLOWS,
• 1. 17-30 GPM HYDRAULIC FLOW IS REQUIRED TO ALLOW FOR BEST FUNCTIONALITY OF ATTACHMENT, ANYTHING LESS THAN 17 GPM OR MORE THAN 30 GPM MAY CAUSE DAMAGE TO THE ATTACHMENT OR SKID STEER.
• 2. A SKID STEER WITH THE MINIMUM WEIGHT OF 6,500 LBS IS REQUIRED FOR STABILITY. (A TRACK SKID STEER LOADER WILL PROVIDE SUPERIOR STABILITY COMPARED TO A NON-TRACKED SKID STEER)
• OTHER SPECS: BRUSH CUTTER- 44" CUTTING WIDTH, CUTTER TILT FROM LEVEL CAPABILITY+90 DEGREES / -35 DEGREES, HORIZONTAL REACH-96",VERTICAL REACH-192". PICTURES ARE FOR REFERENCE ONLY AND MAY NOT BE ACTUAL UNIT PICTURED. AN ELECTRICAL ADAPTER IS REQUIRED TO RUN THIS UNIT,DEPENDING ON WHICH BRAND OF SSL YOU HAVE AS TO WHICH ADAPTER IS REQUIRED TO OPERATE CORRECTLY.

You'll confirm which store you're renting from on your quote list.